tomouse
|
| posted on 29/6/12 at 02:56 PM |
|
|
Another sump bites the dust!
i have a 04-05 zx10 engine. the sump in the mac1 sits very low. i had a sump shortened by 1" after putting a hole in it on a bump in the road.
however i have just put a hole in that one as well. i kept meaning to put a steel sump guard on it but never got round to it. wish i had now. just
venting my frustration i suppose. anyone else on here running an 04-05 zx10 engine?
|
|
|
|
|
bartonp
|
| posted on 29/6/12 at 03:00 PM |
|
|
Blow-moulded polypropylene and a plastic pickup pipe?
[Edited on 29/6/12 by bartonp]
|
|
|
tomouse
|
| posted on 29/6/12 at 03:04 PM |
|
|
its an aluminum sump and plastic pickup.
|
|
|
BobM
|
| posted on 30/6/12 at 06:28 AM |
|
|
Not sure if it's the same on an 04-05 but Andy Bates does a billet sump for the 06-on ZX10 that several of us use in RGB. Very well proven not
to surge and will give you max ground clearance.
Not very Locost but very BEC 
|
|
|
tomouse
|
| posted on 30/6/12 at 02:50 PM |
|
|
Thanks but the 04-05 is different and Andy doesn't make one for the 05.
|
|
|
