mad-butcher
|
| posted on 7/9/04 at 06:56 PM |
|
|
vicky green harness for indy blade
hi guys
bought a vicky green loom for my blade powered indy (got a premier one in my indy pinto) how much of this loom can i chop out... gonna have to open it
up and what will i have to add to it for the blade...
thanks in advance
tony
|
|
|
|
|
scotlad
|
| posted on 7/9/04 at 07:17 PM |
|
|
all the info you need is here:
http://www.dodgyroger.com/locost/Tech_Tips_Wiring_the_Fireblade_engine.pdf
|
|
|
shortie
|
| posted on 7/9/04 at 08:02 PM |
|
|
Why not do it the other way round and use the blade loom and add the things you need to it, seemed much easier to me!!
Rich.
|
|
|
ChrisGamlin
|
| posted on 7/9/04 at 09:12 PM |
|
|
Yup, I just used a stripped out blade loom for the engine, and made up my own for the lighting etc.
|
|
|
Lightning
|
| posted on 7/9/04 at 09:19 PM |
|
|
Ditto...Trailer wire for the rear lights
Steve
|
|
|
Jasper
|
| posted on 8/9/04 at 01:27 AM |
|
|
Same here - not too hard ...... though my most hated part of the build.
|
|
|
scotlad
|
| posted on 8/9/04 at 11:47 AM |
|
|
all very well guys but he's already bought the loom..............
|
|
|
ChrisGamlin
|
| posted on 8/9/04 at 12:06 PM |
|
|
Maybe, but if most of it needs to be chopped out then Tony might as well consider flogging it on and go the alternate route as suggested, might be
less work and cheaper to do.
Chris
|
|
|
shortie
|
| posted on 8/9/04 at 12:58 PM |
|
|
Exactly what I am going to do, got a Vicki Green loom and then decided to do it all myself so if anyone wants a Vicky Green loom then I'm open
to offers!
Rich.
|
|
|
