roadrunner
|
| posted on 22/9/12 at 07:47 PM |
|
|
10mm bolt thread size
I am trying to find some 3 inch bolts for my zx10r engine mounts, but m10's don't fit.
They seem to be 10mm but with the thread size of a m8 bolt.
Can some one tell me what I need to be looking for.
Thanks
Brad.
|
|
|
|
|
big_wasa
|
| posted on 22/9/12 at 07:57 PM |
|
|
bikes often use a fine thread so the they could be m10x1 or even m10x1.25
|
|
|
NS Dev
|
| posted on 22/9/12 at 08:33 PM |
|
|
if the pitch is same as m8 then its 1.25mm
Retro RWD is the way forward...........automotive fabrication, car restoration, sheetmetal work, engine conversion
retro car restoration and tuning
|
|
|
madteg
|
| posted on 22/9/12 at 09:08 PM |
|
|
Sounds like m10x1.25 also know as m10 fine.
|
|
|
roadrunner
|
| posted on 22/9/12 at 09:49 PM |
|
|
Thanks fellas.
|
|
|
BobM
|
| posted on 25/9/12 at 11:31 AM |
|
|
They're M10 fine
Not very Locost but very BEC 
|
|
|
