matt.c
|
| posted on 13/6/18 at 10:31 AM |
|
|
Zx9 E wiring
Long shot but has anyone got a diagram on how to wire up a zx9E engine please? Got one fitted but cant get it to fire. Just want to check how others
have wired it.
Many thanks for your time guys.
Cheers
Matt
|
|
|
|
|
gremlin1234
|
| posted on 13/6/18 at 11:44 AM |
|
|
a quick search found
http://serwer.robert.webd.pl:30/manual/Kawasaki_ZX_9R_(ZX900_C1,D1)_98_Service_Manual_ENG.pdf
I have seen common problems associated with the stand position switch. (yea you don't have a stand, need to bypass the switch)
|
|
|
minitici
|
| posted on 14/6/18 at 09:23 AM |
|
|
Has your engine ever run in the car?
If it is a new installation and you are not using the bike's ignition switch, you will need to fit a 100 Ohm resistor into the grey wire feeding
to the CDI/ECU.
As stated above, the side stand switch also needs to be linked out.
|
|
|
wylliezx9r
|
| posted on 14/6/18 at 11:41 AM |
|
|
From memory I believe the clutch switch also has to be shorted.
I spent a lot of money on booze, birds and fast cars. The rest I just squandered.
George Best
|
|
|
