erwe
|
| posted on 29/8/18 at 09:37 AM |
|
|
Yamaha R1 (5vy) oil direction question
I'm changing the water / oil cooler for an adaptor to have an external cooler and accusump.
Is the middle hole (just like the oil filter) the inlet?
|
|
|
|
|
adithorp
|
| posted on 29/8/18 at 03:51 PM |
|
|
On the cooler the oil enters via the bolt and exits round the side... On the filter it enters via the side and exits through the bolt/centre
There are diagrams on pages 2-29 2-30 2-31 of the yan' manual with arrows indicating flow
"A witty saying proves nothing" Voltaire
http://jpsc.org.uk/forum/
|
|
|
adithorp
|
| posted on 29/8/18 at 03:53 PM |
|
|
Worth noting that with an external oil cooler it takes a lot longer for the oil to reach a decent temp.
"A witty saying proves nothing" Voltaire
http://jpsc.org.uk/forum/
|
|
|
erwe
|
| posted on 30/8/18 at 05:59 AM |
|
|
Thanks.
I know it taker longer but the engine is in a single seater race car.
|
|
|
