shortie
|
| posted on 24/1/05 at 10:34 AM |
|
|
Cooling pipe T-piece
I need a T-piece to fit in my bottom cooling pipe on the blade, I am currently using a Rover tank but as I have bought an MNR ally expansion tank I
now need a 10mm take off from the pipe so basically a 22\10\22mm T-piece.
Does anyone know where I might get one?
ta,
Rich.
|
|
|
|
|
locoboy
|
| posted on 24/1/05 at 01:06 PM |
|
|
can you get copper pipe reducers in the right kind of sizes?
Bit of solder and Robert is your fathers brother.
ATB
Locoboy
|
|
|
ReMan
|
| posted on 24/1/05 at 01:47 PM |
|
|
I`ve asked MK to make me a alloy bottom pipe with the T piece in it,
I hope I can pick it up this week sometime if anyones listening!
They make and fit them to their own builds.
Colin
www.plusnine.co.uk
|
|
|
ko_racer
|
| posted on 24/1/05 at 01:50 PM |
|
|
I got all my pipes made by pace products
http://www.paceproducts.co.uk/automotive-parts.shtml
Look under accessories/swaged tubes.
I got mine within a few days.
Keith
|
|
|
ChrisGamlin
|
| posted on 24/1/05 at 03:05 PM |
|
|
I may have a spare one made up in ally tube. I had one from ST which was steel so got my uncle to make up an ally one as the steel one was rusting
slightly and colouring the coolant. I havent yet got round to fitting it and Im now converting to R1 so wont need it. If I can find it in my garage
next weekend its yours for a tenner plus a bit of postage.
|
|
|
ChrisGamlin
|
| posted on 24/1/05 at 03:10 PM |
|
|
Actually, just noticed you're only in Southwater. My car's in Midhurst so if I do find it you're welcome to pop over and pick it
up.
Chris
|
|
|
mad-butcher
|
| posted on 24/1/05 at 06:33 PM |
|
|
common plumbing size about £1.20 from B & Q
|
|
|
