jossey
|
| posted on 10/1/20 at 04:48 PM |
|
|
Sanity check my brain BEC r1 stator voltage reading
To the collective.
Thanks in advance as always
I've got very little experience with the stator of an r1 so maybe a dumb question.
Should I be able to read voltage from the wires coming from the stator and if so what would I expect when the bike is just ticking over.
Its a 2006 5vy engine
Thanks all
David
Thanks
David Johnson
Building my tiger avon slowly but surely.
|
|
|
|
|
hobbsy
|
| posted on 10/1/20 at 06:17 PM |
|
|
Yes but remember it's AC, it'll vary a bit with revs from memory maybe like 5 to 25v. The book of lies specifies I think.
|
|
|
r1_pete
|
| posted on 10/1/20 at 06:33 PM |
|
|
To check the stator you need to measure the resistance between any two of the three yellow wires.
Resistance s(ould be 5-6 ohms iirc, but more importantly within a very small margin of each other, and, there should be no continuity to -ve.
|
|
|
adithorp
|
| posted on 10/1/20 at 09:46 PM |
|
|
Measure the resistance as said.
What's the issue you have?
"A witty saying proves nothing" Voltaire
http://jpsc.org.uk/forum/
|
|
|
jossey
|
| posted on 11/1/20 at 08:21 PM |
|
|
Thanks all.
Adi hello pal, the old stator coil pretty much smashed its self to pieces. Replaced the coil and still no power but wanted to check if it was working
or had done in the rectifier as well.
I'll check the resistance and let you all know what's next.
Thanks again.
Thanks
David Johnson
Building my tiger avon slowly but surely.
|
|
|
