shortie
|
| posted on 4/7/05 at 06:30 PM |
|
|
Max revs
Configuring my Digidash for shift lights, what's the peak revs for the RRR blade?
ta,
Rich.
|
|
|
|
|
shortie
|
| posted on 4/7/05 at 06:42 PM |
|
|
thanks Chris, will give your settings a go and see how it goes.
Rich.
|
|
|
ChrisGamlin
|
| posted on 4/7/05 at 08:17 PM |
|
|
The rev limiter kicks in at 11750 on the blade, but similar to Chris, Id say look to change around 10,500-11,000 as there's not anything to be
gained above those revs really.
|
|
|
tks
|
| posted on 4/7/05 at 09:19 PM |
|
|
yeah
just pull until you don't feel any change?
since the max HP is always lower als Max revs..
(its because Cilinder/chamber filling gets worse)
sow it will be arround 10:500 max hp??
Tks
The above comments are always meant to be from the above persons perspective.
|
|
|
ChrisGamlin
|
| posted on 5/7/05 at 09:14 AM |
|
|
Yep peak power on mine on the rolling road was around 10,500, but revving to peak power isnt necessarily the fastest way of accelerating, you really
need to rev slightly over peak power so when changing up, you drop back into a higher power band.
|
|
|
