Oil Type/COOLING for ZX9R

Not logged in [Login - Register]

LocostBuilders » Forum » BEC » Oil Type/COOLING for ZX9R

Water Pumps at MachineMart.co.uk

Printable Version | Subscribe | Add to Favourites

westindy

Junior Builder

Posts 87
Registered 18/10/02
Location Buntingford - Herts
Member Is Offline

Building:

posted on 14/5/03 at 08:30 PM

Oil Type/COOLING for ZX9R

What Oil type are you using in your ZX9R - type synthetic/semi/grade...etc
Also I'm a bit confused on the cooling pipe runs/route from the pump/oil cooler to rad any help would be appreciated.
Thanks, Paul

MK9R

Contributor

Posts 3017
Registered 17/10/02
Location Cleobury Mortimer, Shropshire
Member Is Offline

Photo Archive Go!

Building: MNR GM3 RGB racer - 08 ZX10 powered class F

posted on 15/5/03 at 06:20 AM

We were reccommended to use a semi, it cost £37 for 4 litres so it better be good! Time will tell!

Cheers Austen

RGB car number 9
www.austengreenway.co.uk
www.automatedtechnologygroup.co.uk
www.trackace.co.uk

benedict

Junior Builder

Posts 59
Registered 12/5/03
Location Beneath the fitted carpets,beyond the padded cells
Member Is Offline

Building: Built TigerCat & ST-Locosaki, now Cat7 :-O

posted on 16/5/03 at 08:59 AM

As reccomended by a lot of people (inc RGBers IIRC) on the BEC list, I use Redline.
See http://www.redlineoil.co.uk for details and a BEC FAQ.

No connection etc etc.

Cheers,
Ben

LocostBuilders » Forum » BEC » Oil Type/COOLING for ZX9R

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.