zilspeed
|
| posted on 8/11/06 at 05:43 PM |
|
|
Big Old Kwaks again CDI Wiring ?
Wiring......
Currently trying to suss out wiring for Ye Olde ZX10 motor.
I have a butchered loom, I have an immaculate loom, I have a CDI, I have a fusebox, I have switches.
Before I go any further, the ZX10 CDI is quite different to the ZZR1100 CDI even though the engines are very similar.
Woudl any of you guys who used the GPZ1000RX or ZX10s have any schematics I could have a swatch at ?
I already have CalvinXs ZZR1100 modified loom drawing. And the difference in the CDI puts me off.
Ideally I'm looking for a pin out diagram of the ZX10 CDI.
Cheers
John F
[Edited on 8/11/06 by zilspeed]
|
|
|
|
|
Guinness
|
| posted on 8/11/06 at 09:14 PM |
|
|
ZX1000 A or ZX1000 B?
Check your email!
Mike
|
|
|
zilspeed
|
| posted on 11/11/06 at 03:42 PM |
|
|
Two points.
Guinness is a star - post me the relevant wiring diagram which got me 95 % of the way there.
I then contacted Douglas Anderson of chain driven diff fame (Douglas has a ZX10 motor in his Hawke and he has sent me a PDF of an absolutely minimal
wiring setup for the ZX10 igniter as used in his Hawke and - shortly my Sylva. All I need and nothing more.
So - bottom line is that a job I had allocated at least a day of time to looks more like half an hour now, tops.
Thanks to all.
|
|
|
bmseven
|
| posted on 23/4/14 at 06:30 PM |
|
|
Hi John
Sent you an email re the above for some help 
BMW 7 Resource
Bures Pit anyone?
|
|
|
