uberf1end
|
| posted on 9/9/03 at 04:39 PM |
|
|
Fireblade Spark Plug Size
Anyone know the size of a blade plug?
I only have deep imperial sockets and don't really want to buy a whole set of metric just to take the plugs out!
I am guessing 17mm but confirmation/truth would be much appreciated.
|
|
|
|
|
Brooky
|
| posted on 9/9/03 at 05:01 PM |
|
|
Pretty certain you want a 10mm plug socket and an extension for the ratchet or whatever as the plugs sit pretty low down, one of those dedicated plug
spanners will not reach the plugs (as i found out!)
|
|
|
ChrisGamlin
|
| posted on 9/9/03 at 05:24 PM |
|
|
Yep its the 10mm (smaller of the two) plug spanners (thats 10mm plug thread diameter not 10mm socket size obviously  ).
A proper plug socket with rubber grip inside makes it a lot easier to get them in/out as they are quite deep inside the head.
Chris
|
|
|
