Richard Quinn
|
| posted on 31/12/07 at 09:39 AM |
|
|
Exhaust diameter?
In general terms, what is the usual sort of inlet diameter to a generic bike end can?
Thanks in advance
|
|
|
|
|
welderman
|
| posted on 31/12/07 at 09:41 AM |
|
|
approx 50mm with 1.5 mm wall thickness
Thank's, Joe 
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
|
907
|
| posted on 31/12/07 at 09:50 AM |
|
|
Hi,
The inlets on some bike cans are bigger.
A T/Ace or R1 is 60mm (ish) and needs to be adapted to fit the 2" pipe most people use.
hth
Paul G
|
|
|
