bikkel
|
| posted on 8/11/03 at 10:40 AM |
|
|
gear linkage
hi
i was wondering if anybody has got some
hints for making my gear linkage for my BEC with rose joints.
any photo's online?
regards
koen de jong
netherlands
www.zx12r-indy.tk
www.zx12r-indy.tk
|
|
|
|
|
OX
|
| posted on 8/11/03 at 01:34 PM |
|
|
i'v got a few pictures in the photo archive that might give you an idea
|
|
|
coozer
|
| posted on 8/11/03 at 10:43 PM |
|
|
Have a look in my photo archive under 'prop' photos and you might get the idea off mine. Basically its a rod that runs forward, pushes a
bar thats welded to a tube that transfers the motion to the right about two inches with another bar thats welded on at 90 degrees to the first that
transfers the fore aft movement up and down and that goes the to original front part of the bike gear mech thats adapted to take the rose joint.
Pheww!
Ask if you want any pucka pictures and I can oblige.
Oh, and the whole system is the remains of a windscreen wiper mechanism off a Leyland National single decker bus! The gearstick is from a press from
the workshop of the said bus depot. Handy working there I can tell ya, if you think some kitcars are bodges you should see how they keep buses
going!!
U2u me if you want the pics!
Steve
|
|
|
OX
|
| posted on 9/11/03 at 02:02 AM |
|
|
sorry,when i asked for rose joints the bloke gave me those,they do the same job though
|
|
|
