phil m
|
| posted on 30/3/08 at 11:18 AM |
|
|
fireblade -no spark
can't get a spark, but there is power up to the coils.
Any ideas or is it get the control unit checked out. Gone over connections etc and cant' find a nice simple solution
engine hasn't been run for a while ,but was ok proviously.
phil
|
|
|
|
|
rgrs
|
| posted on 30/3/08 at 11:56 AM |
|
|
Remember on the fireblades the coils have a permenant 12v to them (provided stop switch closed) the coils are fired by applying a neg to the yell+blue
or blue+yell
which engine is it ?
Roger
|
|
|
phil m
|
| posted on 30/3/08 at 12:12 PM |
|
|
it's a 97
|
|
|
Andy B
|
| posted on 30/3/08 at 01:39 PM |
|
|
Call me on 01449 736633 - I have a few ideas that will probably sort it out
regards
Andy
|
|
|
worX
|
| posted on 30/3/08 at 01:41 PM |
|
|
No point me offering any advice now!!!
Steve
quote:
Originally posted by Andy B
Call me on 01449 736633 - I have a few ideas that will probably sort it out
regards
Andy
|
|
|
phil m
|
| posted on 5/4/08 at 06:49 PM |
|
|
All working again------huge thanks to those who sent me advice !!
Special thanks to Andy Bates from AB performance who spent a sunday afternoon on the phone helping me to sort the problem out----he sent me out a
loom, pulse generator and ignition control unit to help me sort out the fault, only wanting payment on me finding the problem and returning the items
not used ------------also he helped me with the carbs set up after the spark prob was sorted
Once again a great example of locost builders at its best 
|
|
|
