Jason Fletcher
|
| posted on 18/4/08 at 10:40 AM |
|
|
Best gear change cable for bec?
I need a gear change cable that can take a fair bend. I have one from Venhill engineering but it seems a bit stiff to bend and theres quite a bit of
friction too.
My question is are thay all like that or is there a better one on the market?
Jason
|
|
|
|
|
bassett
|
| posted on 18/4/08 at 12:34 PM |
|
|
Mine from MNR takes quite a harsh bend and still pulls easily might be worth giving them a try.
Adam
My MNR Blog Updated Jan 2010 - Track Day Prep Begins!
|
|
|
ReMan
|
| posted on 18/4/08 at 01:21 PM |
|
|
Fair bend?
Mine turns about 12"diameter, but I would,nt like to kick it tighter than that.
Does depend on the thickness (obviously).
recent thread on the topic....
http://www.locostbuilders.co.uk/viewthread.php?tid=86661
|
|
|
Jason Fletcher
|
| posted on 18/4/08 at 01:59 PM |
|
|
Cheers Adam, funny thing is I actually have an account with a marine suppliers and have found some of the best quality cables that will take a
8" bend for £15.00 +vat. Ive ordered a couple to see if they are any good. If no good then I'll try MNR
J
[Edited on 18/4/08 by Jason Fletcher]
|
|
|
