iiyama
|
| posted on 28/4/08 at 08:17 PM |
|
|
Temps and pressures
What would be a good point to set high water temp warning for a 'Busa? Also I know the oil pressure tends to go from quite low at idle to quite
high at the upper RPM range, (especially as I have a high pressure pump fitted), but what would be a good point to set a warning for low oil
pressure?
Cheers
If its broke, fix it. If it aint broke, take it apart and find out how it works!
|
|
|
|
|
Jon Ison
|
| posted on 28/4/08 at 08:24 PM |
|
|
Not same engine but I set low oil warning at 15psi and high water at 100.
|
|
|
iiyama
|
| posted on 28/4/08 at 08:28 PM |
|
|
Thanks Jon, youve confirmed what I had in mind.
Also meant to ask about oil temp though. Dont think high oil temp will be a problem as I probably gone a little mad with the size of the oil cooler
but I might as well set the warnings all the same
If its broke, fix it. If it aint broke, take it apart and find out how it works!
|
|
|
