adithorp
|
| posted on 3/5/08 at 11:50 AM |
|
|
R1 sproket sizes?
Does anybody know what size (No of teeth) sprokets are fitted as standard on an '06 R1? I've been through the service manual and
it's not there!
Also...Any ideas what the outside diameter (or roll out circumference) is on the rear tyre; 190/50/r17?
It's to help me work out the correction I need for my speedo. I've got a "yellow box" healer and it works by correcting the %
difference between original ratio and current one. I can correct at SVA on % difference between actual and indicated speeds but I'd like to get
somewhere close first.
adrian
|
|
|
|
|
adithorp
|
| posted on 3/5/08 at 01:58 PM |
|
|
Freelander diff' so 3.21 (I think) and 205/50/15 tyres.
adrian
|
|
|
grub
|
| posted on 3/5/08 at 03:05 PM |
|
|
yeh i was just going to say that my self but ya beat me to it chris
|
|
|
adithorp
|
| posted on 3/5/08 at 03:58 PM |
|
|
...and 0-60 in first!
Well 18 months ago I didn't know as much as I do now and that diff' was recommended to me (i'm not the only one). Don't think
it'll hit the limiter in top very often! The Fury isn't quite the brick that a Seven is though.
-20% should be ok for SVA then. Thanks for that.
adrian
|
|
|
Coose
|
| posted on 4/5/08 at 02:44 PM |
|
|
In which case you can fit proper sized wheels (13" )! 
[Edited on 4/5/08 by Coose]
Spin 'er off Well...
|
|
|
adithorp
|
| posted on 4/5/08 at 07:08 PM |
|
|
There's a set of CXR 13" rims with R888's on (205/60/13rears) waiting to go on post SVA. They're a bit wider ET so might not
pass with them. The 15's should slow things down a slight bit while I get used to it (and have more tread for the current climate).
adrian
|
|
|
Coose
|
| posted on 4/5/08 at 07:51 PM |
|
|
Good call! 
There's nowt wrong with R888s, even in the damp! 
Spin 'er off Well...
|
|
|
