Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Dry sum BEC. Clutch not submersed in oil. I don't get it..
Jason Fletcher

posted on 19/5/08 at 09:20 PM Reply With Quote
Dry sum BEC. Clutch not submersed in oil. I don't get it..

WARNING*** BEWARE OF NUMPTY QUESTION TO FOLLOW..........


Just pondering here about using a dry sump on a BEC. How come it's ok dry sump these if the clutch is normally submersed in oil but is not when a dry sump used?

View User's Profile View All Posts By User U2U Member
smart51

posted on 19/5/08 at 09:27 PM Reply With Quote
The R1 clutch is not submersed in oil. It does flick oil off when running so it must be fed oil or pick it up from somewhere.
View User's Profile View All Posts By User U2U Member
Guinness

posted on 19/5/08 at 09:40 PM Reply With Quote
Yup, my ZZR has a spray bar mounted on the clutch cover plate, which keeps it moist, rather than wet

The spray bar is connected to the oil pump, and then runs up inside the main case, where it drops down onto the gears / selector forks.

HTH

Mike






View User's Profile View All Posts By User U2U Member
BenB

posted on 20/5/08 at 06:45 AM Reply With Quote
My standard ST1100 has an oil spray into the clutch housing but has a seperate scavenge pump to drain it ASAP.

ie moist not wet

View User's Profile Visit User's Homepage View All Posts By User U2U Member
nick205

posted on 20/5/08 at 07:48 AM Reply With Quote
Now for a real numpty question, but how do wet clutches work?

I've spent a considerable amount of time in the past trying not get oil on car clutches.

View User's Profile View All Posts By User U2U Member
Phil.J

posted on 20/5/08 at 08:45 AM Reply With Quote
Most bike clutches and gearboxes are fed with pumped oil through the shafts that are in them, not relying on splash from the oil surrounding them.
The wet clutches work due to the different nature of the materials on the driven plates, and the sheer amount of contact area on a multiplate clutch.
One thing to be careful of when running a bike engine is not to use a synthetic oil designed for a car engine, only oil for bike engines. Synthetic car engine oils contain an additive that may make your bike clutch slip.

View User's Profile E-Mail User View All Posts By User U2U Member
RazMan

posted on 20/5/08 at 09:06 AM Reply With Quote
The oil in a bike clutch is mostly for cooling iirc.





Cheers,
Raz

When thinking outside the box doesn't work any more, it's time to build a new box

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
sucksqueezebangblow

posted on 20/5/08 at 10:26 AM Reply With Quote
I've just fitted the Extreme Engines dry sump and it comes with a baffle to reduce the amount of oil that flows through from the crank case to the clutch housing. Apparently without it too much oil gets through and can pool in the clutch housing (presumably on left hand corners).

Clive.





Better to Burnout than to Fade Away JET METAL ~ AndySparrow ©

View User's Profile View All Posts By User U2U Member
Jason Fletcher

posted on 25/5/08 at 09:52 AM Reply With Quote
Clive

Ive also fitted a Nova dry sump but I never fitted the baffle plates and advice from an " pro" I hope I am not going to have any problems..

Jason

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.