Nosbod
|
| posted on 9/6/08 at 09:42 PM |
|
|
R1 Fuel Pipe Help.
Finally got the engine in and started "plumbing her in" but am unsure where some of the fuel pipes go. Reading the Haynes manual i have a
feeling some may be rogue pipes which would have connected to the bike tank, but i am not sure. I have included links to 4 pictures. (for the record
I also know that i cant use original airbox - its there so i can figure what goes where. Again any help would be much appreciated.
Pic 1 What do i do with these?
Pic 2 - Not sure what connects to this ?
Pic 3 - Not sure what these 2 connect to?
Pic 4 - NOt sure what these are for? Each one
currently goes to the following:-
- Drains off
- Drains off (has a small black unit in-line - possibly a filter?
- into Bottom of Crankcase just above cooling pipe
- Drain
- T-junction with one way to drain and one way to a unit under the carbs
Sorry for the epic post and thanks in advance, Chris.
|
|
|
|
|
mad-butcher
|
| posted on 9/6/08 at 09:57 PM |
|
|
pic 2 don't worry about it
pic 3 the one on the carb is I believe a water feed to heat the carbs exits the carbs at pic 2 so just forget them.
Can't get my head round the others at the moment
tony
pic 4 item 3 if you feel down the pipe you should find it connects to the main water pump feed casting I've just got a bolt in mine and use it
for bleeding any air out of pump
[Edited on 9/6/08 by mad-butcher]
|
|
|
Nosbod
|
| posted on 10/6/08 at 09:55 PM |
|
|
Cheers Tony, thats a few eliminated, now to figure out the other ones. 
|
|
|
