Koss
|
| posted on 29/6/08 at 08:03 PM |
|
|
Any demand for these
Fully cnc formed in alloy.
Choice of filters or could be cut to fit inside airbox.
I am going to get one manufactured but if I got a batch of say 20 the price would greatly reduce due to machine setting and tooling.
What do you think?
|
|
|
|
|
SeaBass
|
| posted on 29/6/08 at 08:27 PM |
|
|
mmm. Bit vague buddy. Your not gonna cut that from a piece of billet?
What engine are you talking about - port spacing, ram pipe length, attachment method etc etc.
JC
|
|
|
Koss
|
| posted on 29/6/08 at 08:54 PM |
|
|
Yeah sorry its a bit vague at the moment.
It has a 2mm thick alloy backing plate with four holes. The stubs protrude through the plate @ 15mm and are tig welded in place. The length of the
stack can be varied 35mm up to 60mm without to much tooling change. The port spacing can also be changed on the backing plate prior to cutting.
They are secured with silicone tube.
I will not be making any plans on oval type inlets.
Hope that makes things a bit clearer.
Ian.
|
|
|
