maximill666
|
| posted on 14/7/08 at 08:16 PM |
|
|
Any photos of R1 pipercross air filter backing plate
I am having trouble getting correct fitment of my pipercross air filter to my R1 5jj carbs
I would appreciate some photos of any backing plates fitted to a 5jj engine
Thanks in advance
|
|
|
|
|
omega0684
|
| posted on 14/7/08 at 08:29 PM |
|
|
check my archieve, in the engine section, there must be one in there somewhere
|
|
|
maximill666
|
| posted on 14/7/08 at 08:59 PM |
|
|
omega0684
I cant seem to find any pics of a backplate in your archive?
|
|
|
omega0684
|
| posted on 14/7/08 at 09:09 PM |
|
|
is this what you are after?
|
|
|
maximill666
|
| posted on 14/7/08 at 09:12 PM |
|
|
Thanks omega0684
Still looking for a few more if anybody has got any?
|
|
|
omega0684
|
| posted on 14/7/08 at 09:42 PM |
|
|
what sort of pictures are you looking for?
|
|
|
Koss
|
| posted on 16/7/08 at 12:42 PM |
|
|
My 04 R1 with a itg filter.
|
|
|
bitsilly
|
| posted on 16/7/08 at 01:19 PM |
|
|
Just a small point before you cut the holes, the centres are not equally spaced.
I drew a line and worked outwards from the centre with a compass scribe. Used a nibbler to remove most material and a power file for the last bit.
The picture of the plate with the pipercross airbox posted is a different (bigger) size than most blanks, and I think MNR sell one precut for the R1
carbs anyway.
Good luck
|
|
|
bitsilly
|
| posted on 16/7/08 at 01:20 PM |
|
|
To clarify, the pipercross airbox plate is bigger than my pipercross air filter plate.
|
|
|
