EasyJimbo
|
| posted on 20/9/08 at 08:49 AM |
|
|
Engine suppliers
Chaps
Can anyone recomend me a supplier for BEC engines looking at either an r1 or fireblade unit 2nd hand, trying to keep the cost down so wont be looking
at new or nearly new.
apreciate any contacts and ideas on prices
cheers
James
|
|
|
|
|
Paul TigerB6
|
| posted on 20/9/08 at 08:52 AM |
|
|
You could try Malc at Yorkshire Engines and also Andy Bates at AB Performance - both are forum members here
Yorkshire Engines
AB Performance
|
|
|
imp paul
|
| posted on 20/9/08 at 08:54 AM |
|
|
hello i would say go to malc as he will give you a good deal and a very good service also a very good man and give a guarantee on all his engines and
most will tell you the very same on here all the best paul http://www.yorkshireengines.co.uk/ 
|
|
|
ReMan
|
| posted on 20/9/08 at 09:49 AM |
|
|
If you'r looking for an older engine, there is always the opption to buy a complete bike and break it. You will have a complete tested unit with
everything you need to run and a resonable pay back from the bits you sell on
|
|
|
PAUL FISHER
|
| posted on 20/9/08 at 11:34 AM |
|
|
As ReMan says if your after a older engine,just buy a complete bike off ebay for example,you can pick them up for a few hundred quid,you then get all
the running gear you need,clocks etc,then sell on the parts you don't use,this way you end up with a very cheap engine,if your lucky with the
sale of the rest of the bike you may even end up with the engine for free,and you know its a good runner.
|
|
|
MK chippy
|
| posted on 20/9/08 at 03:01 PM |
|
|
Malcs the man to speak to! picked my R1 up from him a week or so ago. less than 2500 miles on the clock. Fookin long drive to pick it up tho!
Dave
|
|
|
EasyJimbo
|
| posted on 20/9/08 at 04:10 PM |
|
|
quote:
Originally posted by MK chippy
Malcs the man to speak to! picked my R1 up from him a week or so ago. less than 2500 miles on the clock. Fookin long drive to pick it up tho!
Dave
Hi Chippy, if you dont mind me asking what sort of money did you pay for it?
James
|
|
|
.JPG)
