stupott901
|
| posted on 24/9/08 at 04:07 PM |
|
|
Blade loom
hi there
i have eventually got my blade engine into my mk chassis so im all happy there
now comes my problem the electrics?
last night i spent two hours of head scratching trying to lay the loom (with origanal loom tape on it ) out on the chassis to see the best way to
position it
has any one got any tips how best to position it ?
is it better to take of the origanal loom tape and split the loom down?
many thanks stuart
|
|
|
|
|
IDONTBELEIVEIT
|
| posted on 24/9/08 at 05:24 PM |
|
|
just got my modded loom back from westfield and theres nothing left  but it works bang on,i'd strip down and cut out everything you dont need
first
wayno!!
Are We There Yet, Are We There Yet!!!!
|
|
|
Mark G
|
| posted on 24/9/08 at 05:33 PM |
|
|
Take the wires you need out, I ended up with about 10 wires for the ECU and then a further 5 wires to the starter relay.
|
|
|
Mark G
|
| posted on 24/9/08 at 05:35 PM |
|
|
I've got a document that shows how to strip the loom and what parts you need from it. If you u2u me your email address I'll send it over
to you.
|
|
|
asn163
|
| posted on 24/9/08 at 05:36 PM |
|
|
We basically stripped out the engine loom and scrapped the rest. We then made up our own loom for the rest of the wiring.
|
|
|
Mark G
|
| posted on 24/9/08 at 05:50 PM |
|
|
quote:
Originally posted by asn163
We basically stripped out the engine loom and scrapped the rest. We then made up our own loom for the rest of the wiring.
ditto
|
|
|
hicost blade
|
| posted on 25/9/08 at 06:42 PM |
|
|
Talk to Andy Bates he can tell you everything you need to know about running minimal wires he said mine is going to use 7 wires but you need a diode
to fool the engine into working without the key.
[Edited on 26/9/08 by hicost blade]
|
|
|
