antonio
|
 posted on 15/10/08 at 08:06 PM |
|
|
oil pressure/temp/level sensor with digidash
hi guys
my digidash always shows O.I.L.
i had a look at my engine yesterday, and it looks i have no oil pressure sensor (orange wire) and no oil temp sensor.
i still have OE oil pressure/level fitted on baffle, but i think digidash doesn't work with it
help needed, i'm a big zero in wiring issue (and a couple of other things....for sure)
|
|
|
|
|
andylancaster3000
|
| posted on 15/10/08 at 08:12 PM |
|
|
I believe that if it isn't connected you need to set the threshold for the low oil pressure warning (the 'OIL' on screen) to 0. This
deactivates the the alarm I think. Might need to check the manual on that one.
Edit: I'm assuming here that you've got an ETB digidash
[Edited on 15/10/08 by andylancaster3000]
|
|
|
antonio
|
| posted on 16/10/08 at 08:23 AM |
|
|
i'll try this tonight
anyone can tell me how to fit pressure and temp sensor on r1?? (to fit with digidash lite of course)
cheers
|
|
|
Powerdenman
|
| posted on 16/10/08 at 11:47 AM |
|
|
Oil press
On my bike engine blackbird and ZX12. My oil pressure sensor fits on a flexible pipe connected to the oil pressure switch connection. The pipe and
connection are available from ETB.
|
|
|
antonio
|
| posted on 16/10/08 at 05:58 PM |
|
|
tried to set all "oil values" to zero, but OIL alarm is still on.
wich wire is connected to oil pressure sensor? orange one isn't it?
|
|
|
