greavesy7
|
| posted on 2/12/14 at 10:44 PM |
|
|
Clutch arm
Currently doing a Bec conversion and while fitting the clutch cable I acidently pulled out the cluch arm. I've put it back in but I can't
remember how much movement I should have ? It's a zx9r f engine
|
|
|
|
|
dave_424
|
| posted on 2/12/14 at 11:45 PM |
|
|
Whenever I have had mine out, i just slipped it back in with a wiggle and a twist, usually it inserts when rotated anticlockwise about 1/4 turn from
where it sits at norman operation. Only ever had it go back in the correct way.
|
|
|
greavesy7
|
| posted on 2/12/14 at 11:48 PM |
|
|
So it's normal for it to come out
|
|
|
dave_424
|
| posted on 3/12/14 at 12:03 AM |
|
|
Yes it is designed to be able to be pulled out pretty easily, but in normal clutch operation it shouldn't be coming out
|
|
|
