Squadge
|
| posted on 4/2/17 at 03:36 PM |
|
|
Are there any propshaft places in the North West?
As per title, but that will be able to raise the car to measure it up.
|
|
|
|
|
MsD
|
| posted on 4/2/17 at 03:44 PM |
|
|
I took mine to a place aptly named 'north West propshafts' near Chorley. Im not sure if they have a ramp but I took the car in and they
measured from above the transmission tunnel.
Mark
|
|
|
ste
|
| posted on 4/2/17 at 05:49 PM |
|
|
+1 for Northwest Props, They made my prop and I got an excellent service all round.
|
|
|
Squadge
|
| posted on 5/2/17 at 06:51 AM |
|
|
I've been up to Northwest props today, very helpful but they don't have facilties to lift the car and have a proper look at it and I think
it may need a centre bearing fitting as well to make sure it clears everything. I just want whoever is making the prop to double check it all and
advise instead of relying on my measurements. 
|
|
|
Squadge
|
| posted on 12/2/17 at 06:55 AM |
|
|
Sorted now, been down to Firow propshafts in Holmes Chapel, who were very helpful. Took the car down on a trailer and even though the weather was bad
they climbed underneath my car on the carpark to mock up a prop that would work. They've come up with a heavy duty 2 piece prop which consists
of custom parts and a porsche centre bearing. Very happy with the service and highly recommend them.
|
|
|
