paulwilson92
|
| posted on 12/8/19 at 09:24 AM |
|
|
Acewell 7659
My Acewell 7659 dash is reading half revs, connected to Kawasaki z1000 ecu output.
Has anyone got any suggestions on how to get this to read correctly ??
pwilson
|
|
|
|
|
russbost
|
| posted on 12/8/19 at 09:39 AM |
|
|
You need to change the setting for rpm pulses, if you currently have it on 1 I think you'll need 0.5
I no longer run Furore Products or Furore Cars Ltd, but would still highly recommend them for Acewell dashes, projector headlights, dominator
headlights, indicators, mirrors etc, best prices in the UK! Take a look at http://www.furoreproducts.co.uk/ or find more parts on Ebay, user names
furoreltd & furoreproducts, discounts available for LCB users.
Don't forget Stainless Steel Braided brake hoses, made to your exact requirements in any of around 16 colours.
http://shop.ebay.co.uk/furoreproducts/m.html?_dmd=1&_ipg=50&_sop=12&_rdc=1
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
paulwilson92
|
| posted on 12/8/19 at 10:09 AM |
|
|
Hi, I can get to the r1p1 etc selection but where is the rpm value ??
pwilson
|
|
|
russbost
|
| posted on 12/8/19 at 10:19 AM |
|
|
Sorry, my bad, I was thinking of the earlier Acewells with which I'm more familiar, The 7XXX series does it differently 1r1p = 1 revolution 1
pulse, & so on, so if you are only reading half revs you are getting half the pulses you need, so if set on 1r1p I think you need to change to 2r
1p
HTH
I no longer run Furore Products or Furore Cars Ltd, but would still highly recommend them for Acewell dashes, projector headlights, dominator
headlights, indicators, mirrors etc, best prices in the UK! Take a look at http://www.furoreproducts.co.uk/ or find more parts on Ebay, user names
furoreltd & furoreproducts, discounts available for LCB users.
Don't forget Stainless Steel Braided brake hoses, made to your exact requirements in any of around 16 colours.
http://shop.ebay.co.uk/furoreproducts/m.html?_dmd=1&_ipg=50&_sop=12&_rdc=1
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
paulwilson92
|
| posted on 12/8/19 at 10:26 AM |
|
|
OK, Thanks I'll give it a try
pwilson
|
|
|
