Jasper
|
| posted on 2/7/03 at 06:05 PM |
|
|
Rolling Road
Had mine on the rolling road today - very interesting. I'm using a pipercross foam filter and dynojet kit. Even using the suggested settings it
was too rich top end, too lean bottom end. I couldn't have told you if it was wrong b4 the test. Now it runs really well.
So for anybody out there whose fitted a different airbox and isn't totally comfortable setting up carbs I can really recommend it. At least I
now know it's running at optimum and not damaging the engine by being too lean.
Unfortunately there was a bit of slippage on the rollers so the power output wasn't very accurate, only showing 120bhp at flywheel. The new
Digidash software now works out bhp, so I'll use that once it's set up.
Well worth the £88 IMO, and the company I used are use to BEC's (Gerald Dale Motorsport in Ninfield, East Sussex).
[Edited on 2/7/03 by Jasper]
|
|
|
|
|
jimgiblett
|
| posted on 3/7/03 at 12:00 PM |
|
|
>Unfortunately there was a bit of slippage on the rollers so the power output wasn't very accurate
I had that problem too. The solution was a person in each seat plus a big guy sat on the roll bar 
Glad to hear its all running well.
Cheers
Jim
|
|
|
Ian Pearson
|
| posted on 26/7/03 at 01:07 PM |
|
|
Hi Jasper,
Have you got a number for Gerald Dale Motorsport ??
Cheers, Ian.
|
|
|
Jasper
|
| posted on 27/7/03 at 12:03 PM |
|
|
01424 893903
Jasper
|
|
|
westindy
|
| posted on 28/7/03 at 05:57 PM |
|
|
Rolling Road - Essex/Herts/Cambs
I'm looking for a Rolling Road to have my Indy ZX9R set up anyone know of one in the Essex/Herts/Cambs area - I want someone that is use to
setting up bike engines???
|
|
|
