Sebastian
|
| posted on 5/5/08 at 07:44 PM |
|
|
ZX-9 Speedo connector, where is it??
Hi Guys,
I have a 2002/2003 ZX-9R engine (Carbs) but i can't find the connector for the speedosensor, i am using the standard loom and clocks.
Or is this an electronic speedo?
Who has a picture of the connector, i am probably looking over it but i am totaly in the dark at the moment.
Thanks.
|
|
|
|
|
Peteff
|
| posted on 5/5/08 at 07:49 PM |
|
|
I think it's the one with the yellow and pink wires to it on the older engines, it reads from the sprocket nut. It might be same on yours.
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
|
JoelP
|
| posted on 5/5/08 at 07:49 PM |
|
|
the speed sensor an my 1998 engine is built into the sprocket cover, hence not present on a 7 style car.
|
|
|
Sebastian
|
| posted on 5/5/08 at 08:03 PM |
|
|
@JoelP, i have that end of the sensor with the connector however i can't find the other end on the wiringloom on the engine.
@Peteff, will search for a pink wire if it's there it should be to difficult to find.
|
|
|
