indyian
|
posted on 18/11/08 at 04:06 PM |
|
|
what gasket do i use on ali webber inlet on 2.0 zetec ?
as above what gasket do i need to use on the inlet for the zetec i using webers the inlet that was removed was plastic and uses rubber rings wich
cant be used any ideas whats everyone else used
many thanks ian
|
|
|
coozer
|
posted on 18/11/08 at 04:19 PM |
|
|
get a silvertop inlet gasket, from a 94 Mondeo for example, check the port sizes are the same and that should do ya.
Plastic inlet? Is it a ST170 engine??
1972 V8 Jago
1980 Z750
|
|
SeaBass
|
posted on 18/11/08 at 04:33 PM |
|
|
A suitable gasket is freely available - I think it's probably the one coozer has mentioned... It's aluminium with rubber bonded on as far
as I remember... I've got mine from Burton Power in the past. It's about 20 notes though.
Here it is...
JC
[Edited on 18/11/08 by SeaBass]
|
|
Dusty
|
posted on 18/11/08 at 08:27 PM |
|
|
I used a smear of silicon goo.
|
|
indyian
|
posted on 19/11/08 at 12:37 AM |
|
|
thanks for the help
|
|