james h
|
 posted on 6/2/09 at 02:31 AM |
|
|
R1 plumbing again :P
I have measured up my carbed R1 (4XV) for coolant hoses, this is what I get:
Oil cooler: 11mm
Water pump: 22mm
Thermostat (towards radiator): 23mm
Could anybody confirm these or tell me any different? Before I go and get me some shiny blue silicone
James
|
|
|
|
|
A1
|
| posted on 6/2/09 at 04:14 AM |
|
|
i made it 25mm for the water pump and thermostat. the thermostat breathers about 6mm internal dia. the oil coolers about 1/4 inch.
mines a 2000 r1
[Edited on 6/2/09 by A1]
|
|
|
