eccsmk
|
| posted on 20/5/09 at 11:21 AM |
|
|
pivot point (gear change)*update*
im trying to make a pivot point to join two rods from my paddleshift
has anyone got any idea's or suggestions
pictures would be ideal,
here are some really poor piccys
the distance between the rods (side to side) is 50mm
front to rear is 50mm and the rod from the padles should sit 80mm above the piece of alu in the second pic
thank you
[Edited on 20/5/09 by eccsmk]
|
|
|
|
|
pgtips
|
| posted on 20/5/09 at 11:32 AM |
|
|
Is this any good for you?
Edit. The same picture is larger if you look in my pictures archive.
[Edited on 20/5/09 by pgtips]
|
|
|
eccsmk
|
| posted on 20/5/09 at 11:40 AM |
|
|
thats absolutely spot on!!!!
why didnt i just move it all forward like that DOH!
thank you very much
|
|
|
eccsmk
|
| posted on 20/5/09 at 06:51 PM |
|
|
ive managed to get my mock up linkage working and its pretty good
i connected the paddles up on their own for a start then added my gear lever back in
a few pics to show whats been done
all i have to do now is made some better looking rods etc but im going to do a bit more testing first
|
|
|
pgtips
|
| posted on 20/5/09 at 07:37 PM |
|
|
SIMPLES
|
|
|
pgtips
|
| posted on 20/5/09 at 07:38 PM |
|
|
Oh and next thing you will need is a FlatShifter.......well worth the dosh.
|
|
|
eccsmk
|
| posted on 20/5/09 at 07:41 PM |
|
|
mmm maybe when the cage is in
the tyres bought
the harness' changed
the car is mapped
thank you for your pic made my life an awful lot easier
the beers are on me
[Edited on 20/5/09 by eccsmk]
|
|
|
