franky
|
| posted on 29/8/09 at 08:08 PM |
|
|
where to get push/pull cables?
as above.... ebay prices seem far far too high!
|
|
|
|
|
myke pocock
|
| posted on 29/8/09 at 08:12 PM |
|
|
Tell me what you want length wise and I will have a look. What is it to be used for? I bought a job lot of choke cables and there may be some rigid
type push/pull cables in there. U2U me.
|
|
|
marco
|
| posted on 29/8/09 at 08:15 PM |
|
|
I have a used one, but we're going away for a week from tomorrow if you can wait a week its £25 posted? Sorry mine is gear shifter cable not
sure what you want lol..
[Edited on 29/8/09 by marco]
|
|
|
CraigJ
|
| posted on 29/8/09 at 08:17 PM |
|
|
Yank ebay
http://cgi.ebay.co.uk/PUSH-AND-PULL-CONTROL-CABLE-475173C4_W0QQitemZ370210694006QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item563246e376&_trksid=
p3286.m63.l1177#ht_500wt_1182
http://cgi.ebay.co.uk/NEW-1-4-X-48-PUSH-PULL-CONTROL-CABLE-1-3071_W0QQitemZ200317466039QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item2ea3d9f5b7&_
trksid=p3286.m63.l1177#ht_1438wt_939
They work out about 25-30 inc p+p
[Edited on 29/8/09 by CraigJ]
|
|
|
blakep82
|
| posted on 29/8/09 at 08:41 PM |
|
|
or what about these?
http://www.rdb93.co.uk/
they're on ebay too (thats how i found them) no experience with them yet though, so i can't comment on price or what they're like,
but i made a thread earlier today about them and someone said they were good
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
owelly
|
| posted on 30/8/09 at 07:27 AM |
|
|
Depending on what you want then for, chandlers sell morse control cables in various sizes.
http://www.ppcmag.co.uk
|
|
|
franky
|
| posted on 30/8/09 at 10:08 AM |
|
|
gear change is what i'm after using it for.
|
|
|
ginger ninja
|
| posted on 30/8/09 at 08:25 PM |
|
|
Speak to Andy at AB Performance - he recommends and sells them in various lengths specifically for gear change applications. Not sure about cost
|
|
|
