Dangle_kt
|
| posted on 5/9/09 at 10:39 AM |
|
|
Why are motorcycle breakers all crap?
What is it about bike breakers thats makes them either asses or incompitent.
I;ve got Blacks Bike about 2 mins from my mates house, but their attitude stinks.
Hills bikes has just opened in Skem, and i've just been told they just sold my loom to someone else...which I;ve won and paid for off ebay a few
days ago.
Grrrrrrrr! 
|
|
|
|
|
Snuggs
|
| posted on 5/9/09 at 10:47 AM |
|
|
Report them to Ebay
Take them to the small claims court for the cost of a replacement + your wasted time at £60 per hour
----------------------------------------------------------------------------------------------------
http://www.topcashback.co.uk/ref/snuggstcb
Spider pig, spider pig, does whatever a spider pig does.
I doubt therefore I may be.
Luposlipophobia : Fear of being chased by wolves around a freshly waxed kitchen floor, while wearing only socks on your feet.
My mind not only wanders, sometimes it leaves completely!
http://www.venganza.org
http://www.jesusandmo.net/
http://www.snuggs.co.uk
|
|
|
r1_pete
|
| posted on 5/9/09 at 11:02 AM |
|
|
Every time I've dealt with blacks its taken 3 goes to get the right bits, R1 alternator windings, they sent R6, then some honda, finally R1,
sone injector rubbers they sent GSXR600 when they'd advertised GSXR750.... took a month to sort out.
They have lots of staff who rip bikes apart but cant write well enough to label the parts properly.....
|
|
|
cd.thomson
|
| posted on 5/9/09 at 11:06 AM |
|
|
took me six weeks to get my "perfect condition" R1 TBs from blacks because theyd sold them to someone else...oh no wait they hadnt.. they
had sold something they never had in the first place... oh no, they hadnt.
When they arrived one of the sliding venturis sticks open. If I hadn't been fixing them all open anyway I'd have flipped!
Craig
|
|
|
Davg
|
| posted on 5/9/09 at 12:32 PM |
|
|
Yep looks like they are messin me about too!
|
|
|
iceman26
|
| posted on 5/9/09 at 01:07 PM |
|
|
i pop over when i need parts from blacks 5mins away they are not any help price changes
from putting phone done to make sure they have the part to getting 5 mins down the road
but i can make sure it is right part before i pay
|
|
|
Richard Quinn
|
| posted on 5/9/09 at 01:33 PM |
|
|
Blacks used to be ok but their service isn't too great now. Time Machine Bikes 2007 (or something like that) shop name on ebay have been
brilliant (but they do specialise in Italian bikes). They even got a part in from another breaker for me to save me dealing with two places. On one
occasion I contacted them about something I needed but they didn't have listed but I didn't know what the proper part name was so they
emailed a few photos of what they thought matched my description so I could select the correct part.
|
|
|
imp paul
|
| posted on 5/9/09 at 03:08 PM |
|
|
you could try malc Yorkshire engines is the way forward
|
|
|
McLannahan
|
| posted on 5/9/09 at 03:18 PM |
|
|
Andy Bates will be able to get you a new loom easily Andy. He'll have all sorts of Blade looms in stock no doubt too.
http://www.abperformance.co.uk/
|
|
|
Jon Ison
|
| posted on 5/9/09 at 03:25 PM |
|
|
Andy and Malc in no particular order are always my 1st port of call, top blokes the both of them, great service, great knowledgeable advice
etc.........
Both have got me out of a tight spot before.
|
|
|
Kriss
|
| posted on 5/9/09 at 05:19 PM |
|
|
spare unlimited have been very good - even via ebay
|
|
|
grusks2
|
| posted on 5/9/09 at 06:41 PM |
|
|
malc at yorkshire for me as well
http://mac1worxbuild.wordpress.com/
forgot my old password so another username doh
|
|
|
mediabloke
|
| posted on 5/9/09 at 07:17 PM |
|
|
These guys were helpful when I was looking around for connectors for my R1 carbs:
Clicky linky
Can't comment on their after-sales, but worth a call to judge for yourself.
|
|
|
Dangle_kt
|
| posted on 10/9/09 at 07:09 PM |
|
|
just a little update... the replacement loom from deadoralive breakers on ebay turned up today, but to my dismay its knackered - the wires from the
main fuse are completely melted bare!
Makes me wonder if my car is ever going to be bloomin fixed!
|
|
|
r1_manx
|
| posted on 11/9/09 at 08:17 AM |
|
|
I bought a 2003 R1 motor with exhaust, loom, ECU etc...from Malc at Yorkshire engines. He was great to deal with and had the parts shipped over to
the Isle of Man on a decent crate and everything seems spot on. I would certainly contact Malc again for any bike bits. Cheers
If im not in action, im in traction!
|
|
|
Dangle_kt
|
| posted on 11/9/09 at 11:49 AM |
|
|
For completness here is what I hope is my final update on this thread. All I need to say is:
andy bates to the rescue once again!
Top bannana!
|
|
|
.JPG)
