jossey
|
| posted on 11/5/10 at 02:35 PM |
|
|
ZZR1100 PROP issue.
I have my zzr 1100 ready to drop in my car. i also have the Sierra LSD in.
where is the best place to get a ready made Prop and adaptor for the Spline of the motorbike?
HELP ME PLEASE!
Thanks
David Johnson
Building my tiger avon slowly but surely.
|
|
|
|
|
matt_gsxr
|
| posted on 11/5/10 at 03:14 PM |
|
|
http://www.sprocket-adaptors.co.uk/
and
http://www.baileymorris.co.uk/pdf/kit_car_two_piece_shaft2.pdf
|
|
|
jossey
|
| posted on 11/5/10 at 03:16 PM |
|
|
matt do i need a 2 part prop then?
i notice they do a 1 part one.
thanks for info so far!
Thanks
David Johnson
Building my tiger avon slowly but surely.
|
|
|
matt_gsxr
|
| posted on 11/5/10 at 04:10 PM |
|
|
yes 2 part.
With BEC it is too long for 1 piece. You get resonance with long props at higher rotation speeds.
I have a 2 piece with a torque resistant tube (TRT) and a slider. The TRT is good for less shock down the drivetrain (it protects the gearbox a
little, and reduces the noise), and the slider is good as although not strictly necessary it is difficult to precisely measure the lengths.
Lots of information here if you search on TRT and prop in the bec section.
Matt
|
|
|
FFTS
|
| posted on 11/5/10 at 04:21 PM |
|
|
Just got back from meeting a guy called Michael (junior) who owns
NW propshafts
He may be doing a conversion for me on a TRT prop. He can make you one for around the £200 mark and very nice and helpful service. Took him out for a
gentle ride  in R1Becca  If you phone them please mention Chris put you in touch. Thanks 
[Edited on 11/5/10 by FFTS]
Chris.
|
|
|
