David_17
|
posted on 16/6/11 at 06:40 PM |
|
|
WANTED Zetec bike carb setup
As per title, i'm looking for a set of bike carbs, manifold and management to fit a zetec.
Anyone got anything?
|
|
|
sm1ggles
|
posted on 16/6/11 at 08:41 PM |
|
|
zetec
i am in the middle of supercharging my zetec if all goes ok i will be selling a set of bike itbs on a zetec manifold with injectors
|
|
will121
|
posted on 16/6/11 at 08:41 PM |
|
|
I have a webcon Alpha ignition only ECU unit K97017 details accessable from their website below, its got a base 2D 1.8/2litre zetec map and comes with
wiring harness, air temp sensor, and crank sensor so should just plug straight into a zetec coil pack to run, it could be potentially remapped to full
3D map.
its designed to run with carbs, but i went injection in the end. im after £100 inc postage if you are interested
webcon ECU
But why do you want to go back to carbs after injection??
|
|
Krismc
|
posted on 17/6/11 at 03:52 PM |
|
|
Thats cheap
Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.
|
|
lewis
|
posted on 17/6/11 at 04:34 PM |
|
|
quote: Originally posted by will121
I have a webcon Alpha ignition only ECU unit K97017 details accessable from their website below, its got a base 2D 1.8/2litre zetec map and comes with
wiring harness, air temp sensor, and crank sensor so should just plug straight into a zetec coil pack to run, it could be potentially remapped to full
3D map.
its designed to run with carbs, but i went injection in the end. im after £100 inc postage if you are interested
webcon ECU
Hi will I have some zx6r carbs with tps (I think I bought off you) and a 2.0l blacktop would this be ok for my setup? How does it compare to megajolt?
I am interested in taking it off your hands if available cheers lewis,oh and could prob get it picked up to save faffing with postage cheers Lewis.
|
|
will121
|
posted on 17/6/11 at 06:41 PM |
|
|
Hi, its sold as for the 1.8/2 litre silvertop so not sure what if any differance there is for the blacktop, differance between megajolt is the Webcon
unit is if you wanted to remap it you wont be able to yourself DIY wise would need to take it to Webcon agent, currently 2D in that doesnt need a TPS
feed, it has a TPS input and could be maped for full 3D map but would again think need a Webcon agent to do it
|
|
pintoavon
|
posted on 20/6/11 at 09:40 AM |
|
|
ive got some zzr1100 bike carbs
[Edited on 20/6/11 by pintoavon]
|
|
FASTdan
|
posted on 21/6/11 at 10:51 AM |
|
|
Got a nice set of CBR900's I can make a manifold up to suit for you.
NEW danST WEBSITE NOW LIVE! Bike carbs, throttle bodies and more......
http://www.danstengineering.co.uk/
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|