roadrunner
|
 posted on 22/11/11 at 12:54 PM |
|
|
chance of a zx10 engine
I have the chance a fairly cheap 07 zx10 engine. Apparently it has a slight issue with 5th gear. How difficult is it to change the selector fork or
the dog gear on these engines.
Also, can anyone tell me if my zx9 headers will fit the zx10.
Thanks
Brad.
|
|
|
|
|
jossey
|
| posted on 22/11/11 at 01:27 PM |
|
|
ahhhhhh its your car i saw lol
dont ask. it was in the summer :O)
thought it was someone from around scunny area but nooooo...
ps engine i have no idea.
Thanks
David Johnson
Building my tiger avon slowly but surely.
|
|
|
Andy B
|
| posted on 22/11/11 at 01:47 PM |
|
|
Gearbox job will be reasonably straight forward but will require crankcase halves to be split.
ZX9 headers will be completely different to ZX10r
hope that helps
regards
Andy
|
|
|
SausageArm
|
| posted on 22/11/11 at 02:09 PM |
|
|
Kind of slightly off topic here, but can you get a taller 5th and 6th gear for the ZX10R?
|
|
|
roadrunner
|
| posted on 22/11/11 at 03:08 PM |
|
|
Thanks for that Andy. I will have the time to do the job right.
Jossey, where about a did you see us.
Brad.
|
|
|
femster87
|
| posted on 22/11/11 at 03:31 PM |
|
|
Am in scunny too hibaldstow. Where abouts were you guys, when there was a lot of work to do in my garage
 Almost done now
|
|
|
Lightning
|
| posted on 22/11/11 at 04:02 PM |
|
|
Just did my zzr1200 gearbox. To be honest, a lot easier than you think. Lots of freezer bags for bolts and take photos as you go and you cant go
wrong.
Steve
|
|
|
