typ17
|
| posted on 4/12/11 at 11:44 PM |
|
|
4XV Cooling system
Hi,
Did a very elaborate and detailed diagram of what I think should be the cooling system for my R1 4xv engine.
But I'm not sure where the breather pipe that is in the inlet of the water pump is supposed to go to... ( top of the header tank maybe?!?)
 
Any help is very welcome.
Thanks again.
Jose
|
|
|
|
|
typ17
|
| posted on 6/12/11 at 09:10 PM |
|
|
no reply 
Could really use some help, anyone?
Thanks.
Jose
|
|
|
afj
|
| posted on 6/12/11 at 09:47 PM |
|
|
thats looks ok was it drawn by a child the small one from the water pump goes to the throttle bodys on the 2003 r1 so i guess it goes to the
carbs on your one
 
R1 Plumbing
[Edited on 6/12/11 by afj]
eerrrrrrrrrrrrrrrr
|
|
|
typ17
|
| posted on 6/12/11 at 10:16 PM |
|
|
thanks for your reply,
on the carbs there is no water cooling ...
If I was using the original radiator it would be connected to the midle of the radiator.
Anyone with a 4xv engine out there??
Thanks
|
|
|
001Ben
|
| posted on 6/12/11 at 10:34 PM |
|
|
ive got a 2001 r1 engine and it is plumbed in as afj has shown, just without the small pipe to the carbs and the pipe from the header goes to the top
of the thermostat too - forget about the radiator
|
|
|
