tomouse
|
| posted on 13/3/12 at 11:53 AM |
|
|
GI-Pro delay
hi all,
i have a GI-pro with ATRE on a mac#1 worx with a 2005 zx10r engine. The gear indicator seems to respond instantly in 1st 2nd and 3rd but in the higher
gears there seems to be a delay, especially in 5th-6th of up to 5/6 seconds. Does anyone know why this could be or had a similar problem?
|
|
|
|
|
skippad
|
| posted on 13/3/12 at 12:08 PM |
|
|
i've got the same problem, don't know why, nobody has gave me an answer... i just put up with it!
|
|
|
eddie99
|
| posted on 13/3/12 at 12:11 PM |
|
|
I had one fitted to a 2008 zx10r, we had the same thing however i dont think it was 5/6 secs delay, more like 1-2. But as you say down the lower
gears, it was perfect.
Just fitting it to the 2010 motor at the moment so i'll see if its any better.
http://www.elitemotorsporteng.co.uk/
Twitter: @Elitemotoreng
Facebook: http://www.facebook.com/pages/Elite-Motorsport-Engineering/153409081394323
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
tomouse
|
| posted on 13/3/12 at 12:15 PM |
|
|
sometimes its so slow i've changed down again before its caught up so it reads 5th im in 6th, change down to 5th but the gipro reads the down
shift so displays 4th??? i get very confused and just try and remember what gear im in!
|
|
|
skippad
|
| posted on 13/3/12 at 01:02 PM |
|
|
I've got a DigiDash and shows correct gear, dos'nt bother me as bought it for ATRE function.
|
|
|
