danny84
|
| posted on 29/4/13 at 10:27 AM |
|
|
What engine???(fireblade)
Hi guys i'm taking delivery of my mk indyblade soon and am a little confused as the year/capacity of the engine
On the v5c it says 928cc
Engine no. c33E-2301781
Am i right in thinking the 928cc engines didn't start till 2000, but the engine no. indicates its a 98 or 99 model????
Its definitely carbed
Infinate wisdom required!!!!
|
|
|
|
|
Proby
|
| posted on 29/4/13 at 10:37 AM |
|
|
Right, the original carbed blades were 893cc, the later carbed blades were 919cc, before they switched to fuel injection. Then it went 929cc I
believe?
[Edited on 29/4/13 by Proby]
Visit GraphicMonster
|
|
|
Benzo
|
| posted on 29/4/13 at 03:50 PM |
|
|
There was also a 918cc Carbed engine, I have seen it on the side of one of my previous blocks, unless its a typo on the V5.
[Edited on 29/4/13 by Benzo]
|
|
|
tompat3463
|
| posted on 29/4/13 at 04:26 PM |
|
|
Danny..its tompa.
there is a website to indentify blade engines on web if U google your eng no it should come up
Raz told me uve bought one... im jealous 
looks very nice too !!..U just need a roll cage for it now !!
have fun
|
|
|
mark chandler
|
| posted on 29/4/13 at 06:40 PM |
|
|
Carbed makes it a 893/918/919, if you have a look above the clutch cover its stamped on the block.
Nice strong engine 
Stick on a turbo and you have busa power without the cost or expensive when it goes bang.
|
|
|
asn163
|
| posted on 29/4/13 at 06:46 PM |
|
|
From Haynes manual engine numbers SC33E - 2300001 onwards are 1999 US spec. 919cc
|
|
|
Ian Jones
|
| posted on 29/4/13 at 06:55 PM |
|
|
i have a 893 blade engine, how hard are they to turbo? are there off the shelf kits?
|
|
|
mark chandler
|
| posted on 29/4/13 at 08:04 PM |
|
|
Lock up clutch
Low pressure turbo
Intercooler
Cobble it together locost style, mine added up to around £750 on top of the base engine (untouched apart from clutch)
There are kits, these will cost you £££, if I was investing this amount of money I would go for a later Kwak engine.
Regards Mark
|
|
|
danny84
|
| posted on 30/4/13 at 01:21 PM |
|
|
quote:
Originally posted by tompat3463
Danny..its tompa.
there is a website to indentify blade engines on web if U google your eng no it should come up
Raz told me uve bought one... im jealous
looks very nice too !!..U just need a roll cage for it now !!
have fun
Areet mate i'll look into it a bit more on google cheers.Car looks canny like i'll give you a bell and pop up for a blast out.I should be
getting it friday or saturday at the latest.Can't acually wait.
|
|
|
danny84
|
| posted on 30/4/13 at 01:22 PM |
|
|
quote:
Originally posted by asn163
From Haynes manual engine numbers SC33E - 2300001 onwards are 1999 US spec. 919cc
How does this differ from uk engines....Anything i should be looking out for as regards to tuning if it turns out to be u.s
|
|
|
tompat3463
|
| posted on 30/4/13 at 06:14 PM |
|
|
If it hasn't already been jetted. Then her it. Andy bates will talk u thought it and it costs around £100 iirc
It's like driving a different car after it has been done
|
|
|
