Siduna
|
| posted on 26/8/14 at 07:08 PM |
|
|
Interested in helping out with CAD?
Help with car body design wanted!
I’m designing and building a mid engined car with a bike engine. I have a CAD software but having been out of the “CAD-software-use” for some years
the modeling speed isn’t what it used to be.
Therefore I´m looking for help to design the body, which I will make out of carbon fibre and epoxy. Not new to making molds and vacuum infusion.
Is there anyone out there interested in helping out? I might be able to help you out with something?
Writing with a broken pencil is pointless
|
|
|
|
|
drt
|
| posted on 26/8/14 at 08:11 PM |
|
|
I'm across the pond, so advise only ^^
What program are you running ?
If you want to do fem analysis of a GFRP/CFRP body...
you'll be in it for the long haul  trust me.
I guess in this stage you are struggling with the design of the thing ?
shaping surfaces is a pain, doing it in cad is hard.
Most designers work from real sketches, which they build up from.
by using a side and front view as underlayers.
Or use a design program, and work with the .stl from there
|
|
|
