stevegough
|
posted on 21/3/15 at 08:21 PM |
|
|
Propshaft for sale
Hello everybody! I'm still alive, though its over a year since my last post.
Only visiting today because I've got to clear out the garage for the house move.
I bought a Kit car prop of someone on here about 5 years ago I think.
It didn't fit my Luego, so I ended up getting one made... expensive mistake really!
Anyway, the prop is from a Ford type 9 gearbox ( ? 23 splines I think ? )
But it doesn't connect to a Sierra Diff - its too small.
I believe it's tail end fits an 'English Axle'.
Measurements:
Gearbox end Outside diam = 35mm or 1 3/8" - inside, the splined shaft would measure 25mm (without the splines) - definitely type 9.
Length - tip to tip - measured as shown in the photo with everything held straight. = 750mm
With the drive end fully inserted up to the hilt, its effective length is = 658mm
There is 92mm insertable. I'm not sure what the min recomended is but I would imagine about 30mm or so.
Rear plate has a 1mm proud of the main plate collar ring inside of the bolt holes.
Rear plate is 82mm dia.
PCD (centre of bolt hole to centre of bolt hole is what I mean - pretty sure they call this PCD!)
The centre collar is 57mm dia.
I would like £65 for this posted, and I'll be putting it on eBay later tonight or tomorrow. (I am in Blackpool if someone is collecting).
Luego Locost C20XE.
Build start: October 6th 2008.
IVA passed Jan 28th 2011.
First drive Feb 10th 2011.
First show: Stoneleigh 1st/2nd May 2011.
'Used up' first engine may 3rd 2011!
Back on the road with 2nd engine may 24th
First PASA mad drive 26/7/11
Sold to Mike in Methyr Tydvil 19/03/14
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
Bolt
|
posted on 21/3/15 at 10:47 PM |
|
|
Hi mate,
I will take it! Will contact via u2u.
Cheers, Simon
|
|
stevegough
|
posted on 22/3/15 at 07:39 AM |
|
|
U2U replied to, Simon.
Luego Locost C20XE.
Build start: October 6th 2008.
IVA passed Jan 28th 2011.
First drive Feb 10th 2011.
First show: Stoneleigh 1st/2nd May 2011.
'Used up' first engine may 3rd 2011!
Back on the road with 2nd engine may 24th
First PASA mad drive 26/7/11
Sold to Mike in Methyr Tydvil 19/03/14
|
|
Bolt
|
posted on 22/3/15 at 10:34 AM |
|
|
Cheers mate; money sent via PayPal.
|
|
stevegough
|
posted on 22/3/15 at 11:29 AM |
|
|
Thanks! Payment received, and propshaft now sold.
Luego Locost C20XE.
Build start: October 6th 2008.
IVA passed Jan 28th 2011.
First drive Feb 10th 2011.
First show: Stoneleigh 1st/2nd May 2011.
'Used up' first engine may 3rd 2011!
Back on the road with 2nd engine may 24th
First PASA mad drive 26/7/11
Sold to Mike in Methyr Tydvil 19/03/14
|
|
Bolt
|
posted on 25/3/15 at 09:07 AM |
|
|
Must say, brilliant packaging, quick delivery and great correspondence. Also to my surprise it fits in my build perfectly!
Thanks for this.
Cheers, Simon
|
|
stevegough
|
posted on 25/3/15 at 05:47 PM |
|
|
Fantastic! Glad to hear you got it safely, and that its such a good fit.
Result! Good luck with rest of the build!
Luego Locost C20XE.
Build start: October 6th 2008.
IVA passed Jan 28th 2011.
First drive Feb 10th 2011.
First show: Stoneleigh 1st/2nd May 2011.
'Used up' first engine may 3rd 2011!
Back on the road with 2nd engine may 24th
First PASA mad drive 26/7/11
Sold to Mike in Methyr Tydvil 19/03/14
|
|