Antnicuk
|
| posted on 17/3/19 at 09:35 PM |
|
|
Anyone using a Race Tech Dash2 with a ZX12 engine?
I have a Race Technologies Dash on my ZX 12 powered Raw Fulcrum. I am having trouble getting the revs to read correctly. I am using the light blue
wire from the ecu and if i put it in 1 pulse revolution I am pretty sure its not showing the correct rpm I changed it to 2 pulses and it seems to be a
bit more accurate but its very hard to tell. Its also difficult to scale as there are only 9 rpm bands to scale it to. ANy help greatly appreciated
600 BHP per ton, Stylus Brought back from the dead! Turbo Rotary Powered!
|
|
|
|
|
peter030371
|
| posted on 18/3/19 at 01:18 PM |
|
|
Have you tried Race Technology for help? They have always been helpful when I have contacted them.
|
|
|
Antnicuk
|
| posted on 20/3/19 at 09:11 PM |
|
|
thanks, i emailed them and they responded, looks like i need to move the speed sensor. I think i sorted the revs, i changed it to 2 pulses per
revolution.
600 BHP per ton, Stylus Brought back from the dead! Turbo Rotary Powered!
|
|
|
