welderman
|
posted on 2/4/05 at 07:16 PM |
|
|
Blade diff etc
Hi there, already got car on wheels some elec to do etc etc, but got a call from a mate saying he knows where theres a 4x4 lsd c/w shafts etc. Dont
know how much. Whats the going rate and what do i need to look out for.
|
|
|
Northy
|
posted on 2/4/05 at 07:27 PM |
|
|
quote: Originally posted by welderman
....what do i need to look out for.
A smaller Avatar!
Graham
Website under construction. Help greatfully received as I don't really know what I'm doing!
"If a man says something in the woods and there are no women there, is he still wrong?"
Built 2L 8 Valve Vx Powered Avon
|
|
welderman
|
posted on 2/4/05 at 07:29 PM |
|
|
Hows that.
|
|
Northy
|
posted on 2/4/05 at 07:30 PM |
|
|
Much better, you got her number?
Graham
Website under construction. Help greatfully received as I don't really know what I'm doing!
"If a man says something in the woods and there are no women there, is he still wrong?"
Built 2L 8 Valve Vx Powered Avon
|
|
welderman
|
posted on 2/4/05 at 07:34 PM |
|
|
Its the wife. She will kill me if she knew.
|
|
carnut
|
posted on 2/4/05 at 07:35 PM |
|
|
I paid £40 for a 3.62 LSD yesterday. Plus £10 to take it out for me.
|
|
andrew.carwithen
|
posted on 2/4/05 at 07:36 PM |
|
|
Firstly, check that it is indeed a LSD.
Rotate one of the lobro diff flanges and the opposite one should turn in the same direction.
If its an open diff, then it will turn in the opposite direction.
Check the tag on the rear casing to see what ratio diff it is (usually 3.62 or 3.92)
The 3.62 is the more desirable of the two. If your very lucky it may be as low as 3.14! (If it is make sure you buy your lottery numbers that week
'cos you sure as hell will win that as well!)
After that, its a case of checking general condition i.e are the cv boots split? are the callipers seized etc.
I paid £50 for my LSD set up which is very cheap! but then spent a further £180 refurbing it such as recon. callipers, new wheel bearings and grease
seals, new boots etc.
I'd say about £100 - £150 is the going rate for a second hand one.
Andy.
|
|
welderman
|
posted on 2/4/05 at 07:38 PM |
|
|
Thanks for that in put chaps. Will keep you posted, thanks.
|
|
andrew.carwithen
|
posted on 2/4/05 at 07:41 PM |
|
|
quote: Originally posted by welderman
Its the wife. She will kill me if she knew.
If that's the wife then I bet you don't bother going out much!!!!
Andy.
|
|
welderman
|
posted on 2/4/05 at 10:17 PM |
|
|
Changed atvar.
|
|