pifular
|
posted on 1/7/05 at 04:24 PM |
|
|
speedo healer
thinking of buying a speedo healer, any one got any experience good or bad. want to use on a MK indy with honda blackbird engine and clocks.
|
|
|
Hellfire
|
posted on 1/7/05 at 04:36 PM |
|
|
brilliant tool!
Better than the Yellow Box...
|
|
subk2002
|
posted on 1/7/05 at 04:40 PM |
|
|
Superb!! Go for it
|
|
wilkingj
|
posted on 1/7/05 at 06:41 PM |
|
|
Uhhh Wot ???
Err what does it do?
1. The point of a journey is not to arrive.
2. Never take life seriously. Nobody gets out alive anyway.
Best Regards
Geoff
http://www.v8viento.co.uk
|
|
tks
|
posted on 1/7/05 at 06:47 PM |
|
|
Wouldn't do it
go the locost way
build it your self..
and learn something..
posted the needed materials earlier in another post.
what does it costs??
for 7pounds i make you one, but you need to make an case for it.
Tks
what it does??
its just a PWM devider or multiplyer..
[Edited on 1/7/05 by tks]
The above comments are always meant to be from the above persons perspective.
|
|
Hellfire
|
posted on 1/7/05 at 07:32 PM |
|
|
Geoff
A small device for recalibrating or 'exacting' out your speedo. Has a range of (IIRC) +-200%. It also converts mph to kph and has a top
speed memory retainer. It's pretty water resistant and guaranteed for two years. It plugs straight into the existing connections. It's
also relatively cheap compared to other alternatives.
HTH
|
|
tks
|
posted on 1/7/05 at 08:13 PM |
|
|
speedohealer
no every one will need that device??
think that many know enough with just an corrected speed?
Tks....
The above comments are always meant to be from the above persons perspective.
|
|
Hellfire
|
posted on 1/7/05 at 09:29 PM |
|
|
When I say recalibrating, what i guess I mean is alters the ratio of input to output with simple dip switches. + and - it's very easy to achieve
almost zero error. Plus if you change your wheels or tyres periphery, a simple 1-2 minute change is all it takes to alter it.
|
|
pifular
|
posted on 1/7/05 at 10:23 PM |
|
|
thanks for that, your comments give me enough confidence to order it. may be back on here for advice during set up. thanks again.
|
|