givemethebighammer
|
posted on 22/3/06 at 10:44 PM |
|
|
o rings for idle screws
Anyone know where I can get some of the above for Honda Blackbird \ Fireblade carbs. Honda only do them as part of the gasket set and I keep dropping
the things because they are so small. A bag of 20 would be useful to keep on the shelf.
|
|
|
MkIndy7
|
posted on 22/3/06 at 11:03 PM |
|
|
Local plumbing suppliers if you've got 1 as a sample i'm sure they could match it up, or would know where to get them from.
|
|
owelly
|
posted on 22/3/06 at 11:32 PM |
|
|
What sort of size are we talking about? If they are tiny, try a dive shop as regulators used them. If they are a bit bigger than tiny, try the
plumbers for shower spares.
http://www.ppcmag.co.uk
|
|
Gav
|
posted on 23/3/06 at 12:10 AM |
|
|
let me know the size, i got a job lot of 400 small o rings from ebay for 75p
|
|
bernie955
|
posted on 23/3/06 at 10:07 AM |
|
|
Make sure they are fuel proof as well.
|
|
givemethebighammer
|
posted on 23/3/06 at 01:53 PM |
|
|
Thanks
Got some from Derby Bearings
20 for a £1
I made sure they were petrol resistant
size for the record is
approx 5mm O/D, 3mm I/D
|
|