rebelrider
|
| posted on 25/10/07 at 09:34 PM |
|
|
drilling chassis
I thought I read on here a little while ago about not being allowed to drill into the chassis ? is this the case ? I've got an idea for the Ali
chassis but I need to drill the chassis ?
|
|
|
|
|
bigrich
|
| posted on 25/10/07 at 09:42 PM |
|
|
i think every person on here has drilled their chassis for rivits,nutserts and general pipe and loom clipping
Rich
.JPG)
A pint for the gent and a white wine/fruit based drink for the lady. Those are the rules
|
|
|
rebelrider
|
| posted on 25/10/07 at 09:49 PM |
|
|
ok cool thank you
|
|
|
Avoneer
|
| posted on 25/10/07 at 09:58 PM |
|
|
Scary.
Pat...
No trees were killed in the sending of this message.
However a large number of electrons were terribly inconvenienced.
|
|
|
Fred W B
|
| posted on 26/10/07 at 05:49 AM |
|
|
Yea..
If you want to put a substantial bolt through a tube you would have to weld in a piece of pipe or a bush to avoid crushing the tube when you tighten
the bolt.
Fred W B
You can do it quickly. You can do it cheap. You can do it right. – Pick any two.
|
|
|
%20(WinCE).JPG)
