hobbsy
|
| posted on 28/11/07 at 05:18 PM |
|
|
Anyone know R1 head gasket thickness (5PW/4XV)
Anyone know (or can measure) the thickness of the standard R1 head gasket?
Both crushed and uncrushed would be useful.
I have a used one I could measure but I'm not going to be able to do that for a couple of weeks.
FYI trying to work out compression drop from fitting a McXpress 1.7mm one (need to find out whether thats crushed or uncrushed thickness too).
|
|
|
|
|
locoR1
|
| posted on 28/11/07 at 06:57 PM |
|
|
Just braved the cold and measured my old 4XV gasket 0.8mm crushed.
Dave……..
 
Description
Check out my CB500T Cafe Racer build diary
|
|
|
hobbsy
|
| posted on 29/11/07 at 07:29 PM |
|
|
Thanks for that Dave 
|
|
|
