Hellfire
|
| posted on 10/11/03 at 02:07 PM |
|
|
Uprated Clutch Springs
Can anyone advise a good supplier for uprated clutch springs and also give an indicative cost for a set required for a Fireblade? 
|
|
|
|
|
Jasper
|
| posted on 10/11/03 at 02:23 PM |
|
|
TTS - http://www.tts-performance.co.uk/
Tel: +44 (0) 1604 636363
About £18 - and a must.
|
|
|
Hellfire
|
| posted on 10/11/03 at 02:49 PM |
|
|
Am I looking in the wrong place? I can't find any in their online catalogue 
|
|
|
ChrisGamlin
|
| posted on 10/11/03 at 04:44 PM |
|
|
I'd go with the Barnett ones, the TTS ones seem to be the same as the ones that EBC used to supply, which shrunk badly and were shorter than
standard springs within a few hundred miles. Having said that, those experiences happened about 2 years ago so they may well have changed them by
now.
BTW, Jasper, you need a taller roll hoop! 
[Edited on 10/11/03 by ChrisGamlin]
|
|
|
loafersmate
|
| posted on 10/11/03 at 05:19 PM |
|
|
I've got an EBC street racer kevlar clutch and heavier springs, still doing good service after 1200miles and donnington, cost about £70 I
think.
Ben
|
|
|
Hellfire
|
 posted on 10/11/03 at 05:25 PM |
|
|
Uprated Springs...
what manufacturer do TTS supply? Anyone know?? We have a few outlets around here all offering uprated springs... curious as to the manufacturer...
|
|
|
Hellfire
|
| posted on 11/11/03 at 02:30 AM |
|
|
Barnett Uprated Clutch Springs
Found a good site whilst looking for the TTS site... cheaper too for Barnett Springs!
http://www.biketorqueracing.co.uk
|
|
|
