Mark G
|
| posted on 28/4/08 at 06:09 PM |
|
|
Blade generator wires
Hi all,
Some kind sole decided to cut the genni wires on my blade engine prior to removing it from its previous body.
I think they'd all be ok to go in any order to my loom but wanted to check first before I wired it up wrong.
The wires I'm on about are the 3 wires that come from the casing, all of which are yellow.
Piccie below.
|
|
|
|
|
Wadders
|
| posted on 28/4/08 at 06:33 PM |
|
|
The genny is 3 phase, so they're all the same.
Al.
]Originally posted by Mark G
Hi all,
Some kind sole decided to cut the genni wires on my blade engine prior to removing it from its previous body.
I think they'd all be ok to go in any order to my loom but wanted to check first before I wired it up wrong.
The wires I'm on about are the 3 wires that come from the casing, all of which are yellow.
Piccie below.
[Edited on 28/4/08 by Wadders]
|
|
|
Mark G
|
| posted on 28/4/08 at 07:25 PM |
|
|
Great,
Thats what I was hoping to hear.
Thanks
|
|
|
